Menu

Blog

Page 9980

Jun 1, 2018

News: SMAP, the spacecraft I once worked on, is providing relative moisture data from the Earth’s surface

Posted by in categories: food, health, space travel

It’s interesting to note that eastern Texas, Louisiana and Arkansas are experiencing much less soil moisture during the middle of May…


Data from the first NASA satellite mission dedicated to measuring the water content of soils is now being used operationally by the U.S. Department of Agriculture (USDA) to monitor global croplands and make commodity forecasts.

The Soil Moisture Active Passive mission, or SMAP, launched in 2015 and has helped map the amount of water in soils worldwide. Now, with tools developed by a team at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, SMAP soil moisture data are being incorporated into the Crop Explorer website of the USDA’s Foreign Agricultural Service, which reports on regional droughts, floods and crop forecasts. Crop Explorer is a clearinghouse for global agricultural growing conditions, such as soil moisture, temperature, precipitation, vegetation health and more.

Continue reading “News: SMAP, the spacecraft I once worked on, is providing relative moisture data from the Earth’s surface” »

Jun 1, 2018

Evidence Found for a New Fundamental Particle

Posted by in category: particle physics

An experiment at the Fermi National Accelerator Laboratory near Chicago has detected far more electron neutrinos than predicted — a possible harbinger of a revolutionary new elementary particle called the sterile neutrino, though many physicists remain skeptical.

Read more

Jun 1, 2018

This Filter Makes Your Photos Indecipherable to Facial Recognition Software

Posted by in category: robotics/AI

By selectively altering specific pixels, and AI system can block facial-recognition software without making visible changes to a photo.

Read more

Jun 1, 2018

Engineered antibody summons immune system to kill cancer cells

Posted by in category: biotech/medical

Researchers have engineered an anti-cancer antibody that attaches specifically to cancer cells and summons immune killer cells to destroy the target.

Read more

Jun 1, 2018

Quantum Computing Key Could Protect Blockchain Security

Posted by in categories: bitcoin, computing, quantum physics, security

Although blockchain is traditionally seen as secure, it is vulnerable to attack from quantum computers. Now, a team of Russian researchers say they have developed a solution to the quantum-era blockchain challenge, using quantum key distribution (QKD).

Quantum computers are different from binary digital electronic computers based on transistors. Whereas common digital computing requires that the data be encoded into binary digits (bits), each of which is always in one of two definite states (0 or 1), quantum computation uses quantum bits, which can have more by being in superpositions of states.

Writing in the journal Quantum Science and Technology, the researchers set out a quantum-safe blockchain platform that uses QKD to achieve secure authentication.

Continue reading “Quantum Computing Key Could Protect Blockchain Security” »

Jun 1, 2018

Wi-Fi in the road? Kansas City tech start-up is wiring pavement for safety — and fun

Posted by in categories: futurism, internet

Integrated Roadways of Kansas City is developing “smart pavement” technology that would make roads more than just something you drive on. Roads would become a platform for future mobility and safety applications.

Neil Nakahodo

Read more

Jun 1, 2018

Prototype nuclear battery packs 10 times more power

Posted by in categories: biotech/medical, nuclear energy, robotics/AI, space travel

Russian researchers from the Moscow Institute of Physics and Technology (MIPT), the Technological Institute for Superhard and Novel Carbon Materials (TISNCM), and the National University of Science and Technology MISIS have optimized the design of a nuclear battery generating power from the beta decay of nickel-63, a radioactive isotope. Their new battery prototype packs about 3,300 milliwatt-hours of energy per gram, which is more than in any other nuclear battery based on nickel-63, and 10 times more than the specific energy of commercial chemical cells. The paperwas published in the journal Diamond and Related Materials.

Conventional batteries

Ordinary batteries powering clocks, flashlights, toys, and other compact autonomous electrical devices use the energy of so-called redox chemical reactions. In them, electrons are transferred from one electrode to another via an electrolyte. This gives rise to a potential difference between the electrodes. If the two battery terminals are then connected by a conductor, electrons start flowing to remove the potential difference, generating an electric current. Chemical batteries, also known as galvanic cells, are characterized by a high power density — that is, the ratio between the power of the generated current and the volume of the battery. However, chemical cells discharge in a relatively short time, limiting their applications in autonomous devices. Some of these batteries, called accumulators, are rechargeable, but even they need to be replaced for charging. This may be dangerous, as in the case of a cardiac pacemaker, or even impossible, if the battery is powering a spacecraft.

Read more

Jun 1, 2018

What If Our Sun Were to Die?

Posted by in category: futurism

At least it wouldn’t be so hot outside, right?

Read more

Jun 1, 2018

World’s First 3D-Printed Concrete Housing Project to be Built in Eindhoven

Posted by in categories: 3D printing, habitats

The Dutch city of Eindhoven is to host the world’s first commercial housing project based on 3D-concrete printing, with the first of five planned houses due to start construction this year. The units were developed by a collaborative team including the Eindhoven University of Technology and will be purchased and let out by a real estate company upon completion.

The first house will be a single-floor, three-room house measuring 1000 square feet (95 square meters), to be followed by four multi-story units. The irregular shape of the buildings is based on “erratic blocks in the green landscape,” made possible due to the flexibility of form permitted by 3D-printing.

Continue reading “World’s First 3D-Printed Concrete Housing Project to be Built in Eindhoven” »

Jun 1, 2018

World’s first 3D-printed cornea made from algae and human stem cells

Posted by in categories: 3D printing, bioengineering, biotech/medical, cyborgs, transhumanism

The human eye is a remarkably sophisticated organ and like the lens to a camera, it’s the cornea that focuses the flood of photons into a perceptible image. But for an estimated 15 million people around the world, eye disease and trauma make surgery the only path to clear vision.

In the next few years, artificial corneas may become more accessible thanks to new research out of Newcastle University in the United Kingdom. There, researchers mixed stem cells from the cornea of a healthy donor with collagen and algae molecules to create a bio-ink, which they 3D-printed into an artificial cornea. The research is currently just a proof-of-concept but lays the groundwork for future techniques to create low-cost, easy-to-produce bionic eyes.

Continue reading “World’s first 3D-printed cornea made from algae and human stem cells” »