Menu

Blog

Archive for the ‘bioprinting’ category: Page 6

Nov 20, 2020

Hybrid 3D-printing bioinks help repair damaged knee cartilage

Posted by in categories: 3D printing, bioprinting, biotech/medical, life extension

This may be good news for those who have damaged joints due to sports or old age.

😃


Human knees are notoriously vulnerable to injury or wearing out with age, often culminating in the need for surgery. Now researchers have created new hybrid bioinks that can be used to 3D print structures to replace damaged cartilage in the knee.

Continue reading “Hybrid 3D-printing bioinks help repair damaged knee cartilage” »

Oct 18, 2020

Volumetric Bioprinting Sculpts Complex Shapes in Seconds

Posted by in category: bioprinting

Bioprinting of living tissues.


Living tissues can now be bioprinted in seconds đŸ˜±.

Sep 14, 2020

Ultra-fast 3D bioprinter makes body parts in a flash

Posted by in categories: 3D printing, bioprinting, biotech/medical

Volumetric Bioprinting


Recreating human body parts using a 3D printer. This is possible in the Netherlands with the new bioprinter developed by Utrecht University and UMC Utrecht. This printer can be used to make models of organs or bones, amongst other things. These printed models can be made up of living cells on which medication can be tested, for instance.

Conventional 3D printers work by stacking plastic layers on top of each other. This build-up of layers creates a three-dimensional figure. There are already countless possibilities with these standard 3D printers. Science has been looking for years at how this technique can be applied across different areas.

Continue reading “Ultra-fast 3D bioprinter makes body parts in a flash” »

Sep 11, 2020

Cryogenic 3D Printing Improves Bioprinting for Bone Regeneration

Posted by in categories: 3D printing, bioengineering, bioprinting, nanotechnology

Researchers from China continue in the quest to improve methods for bone regeneration, publishing their findings in “Cryogenic 3D printing of dual-delivery scaffolds for improved bone regeneration with enhanced vascularization.”

A wide range of projects have emerged regarding new techniques for bone regeneration—especially in the last five years as 3D printing has become more entrenched in the mainstream and bioprinting has continued to evolve. Bone regeneration is consistently challenging, and while bioprinting is still relatively new as a field, much impressive progress has been made due to experimentation with new materials, nanotubes, and innovative structures.

Cell viability is usually the biggest problem. Tissue engineering, while becoming much more successful these days, is still an extremely delicate process as cells must not only be grown but sustained in the lab too. For this reason, scientists are always working to improve structures like scaffolds, as they are responsible in most cases for supporting the cells being printed. In this study, the authors emphasize the need for both “excellent osteogenesis and vascularization” in bone regeneration.

Aug 28, 2020

Robot Skin 3D Printer Close to First-in-Human Clinical Trials

Posted by in categories: 3D printing, bioprinting, biotech/medical, government, health, robotics/AI

In just two years a robotic device that prints a patient’s own skin cells directly onto a burn or wound could have its first-in-human clinical trials. The 3D bioprinting system for intraoperative skin regeneration developed by Australian biotech start-up Inventia Life Science has gained new momentum thanks to major investments from the Australian government and two powerful new partners, world-renowned burns expert Fiona Wood and leading bioprinting researcher Gordon Wallace.

Codenamed Ligƍ from the Latin “to bind”, the system is expected to revolutionize wound repairs by delivering multiple cell types and biomaterials rapidly and precisely, creating a new layer of skin where it has been damaged. The novel system is slated to replace current wound healing methods that simply attempt to repair the skin, and is being developed by Inventia Skin, a subsidiary of Inventia Life Science.

“When we started Inventia Life Science, our vision was to create a technology platform with the potential to bring enormous benefit to human health. We are pleased to see how fast that vision is progressing alongside our fantastic collaborators. This Federal Government support will definitely help us accelerate even faster,” said Dr. Julio Ribeiro, CEO, and co-founder of Inventia.

Jul 27, 2020

A Possible Weapon Against the Pandemic: Printing Human Tissue

Posted by in categories: bioprinting, biotech/medical

Bioprinting could be used for testing potential treatments for Covid-19, cancer and other diseases.


Bioprinting’s importance for pharmaceutical analysis is paramount now, not only for potential Covid-19 treatments, but also for testing treatments for cancer and other diseases. Dr. Atala says that the organoids allow researchers to analyze a drug’s impact on an organ “without the noise” of an individual’s metabolism.

He cited Rezulin, a popular diabetes drug recalled in 2000 after there was evidence of liver failure. His lab tested an archived version of the drug, and Dr. Atala said that within two weeks, the liver toxicity became apparent. What accounts for the difference? An organoid replicates an organ in its purest form and offers data points that might not occur in clinical trials, he said, adding that the testing is additive to, rather than in lieu of, clinical trials.

Jul 26, 2020

‘Meat of the future’: KFC to ‘3D bioprint’ meat using ‘animal flesh cells’

Posted by in categories: 3D printing, bioprinting, food

It’s happening



MOSCOW — KFC has partnered with a Russian bioprinting company to bring 3D printed chicken nuggets to the table.

Coined as the “meat of the future,” the lab-created chicken meat is KFC’s response to the growing interest of healthy lifestyles, the rise in demand for meat alternatives and the increasing need to develop more environmentally friendly methods of food production.

Continue reading “‘Meat of the future’: KFC to ‘3D bioprint’ meat using ‘animal flesh cells’” »

Jul 17, 2020

Printer lickin‘ good: KFC is bioprinting chicken nuggets

Posted by in categories: 3D printing, bioprinting, food

“The partners are working together to develop the world’s first laboratory-produced chicken nuggets. The 3D printed nuggets are expected to be similar in taste and appearance to KFC’s original product, but will have the benefit of being more environmentally friendly to produce.”


When I think of KFC and its largely unchanging menu of fried chicken, I do not immediately think of innovation. However a new collaboration forged between the fast-food company and Russia-based bioprinting firm 3D Bioprinting Solutions might just change my mind. The partners are working together to develop the world’s first laboratory-produced chicken nuggets. The 3D printed nuggets are expected to be similar in taste and appearance to KFC’s original product, but will have the benefit of being more environmentally friendly to produce.

The bioprinted chicken nugget project is already underway, and the unlikely partners plan to have a final product ready for testing by this fall. The effort is part of KFC’s mission to create a “restaurant of the future” which leverages state-of-the-art technologies like 3D bioprinting to overcome solutions in the food industry today: such as finding more eco-friendly alternatives to traditional meat.

Continue reading “Printer lickin‘ good: KFC is bioprinting chicken nuggets” »

Jun 9, 2020

Video: Scientists grow a human ear with new, skin-crawling 3D printing method

Posted by in categories: 3D printing, bioprinting, biotech/medical

Their new approach to 3D bioprinting and allows for non-invasive tissue growth and wound healing. It works through injecting bioink cells, the additive material traditionally used in 3D bioprinting, under the skin and using near-infrared light to penetrate the tissue and transfer customizable building designs — like an ear or an abstract shape — to newly injected cells.

The ear began to form in just 20 seconds.


Using a new approach to 3D bioprinting researchers have designed a way to non-invasively grow a wide range of customizable tissue under living skin.

May 23, 2020

Cellular Aquaculture — Feed The World and Save the Oceans — Lou Cooperhouse, President & CEO, BlueNalu — ideaXme — Ira Pastor

Posted by in categories: 3D printing, bioengineering, biological, bioprinting, business, food, futurism, health, lifeboat, science
Page 6 of 16First345678910Last