Menu

Blog

Archive for the ‘3D printing’ category: Page 13

May 19, 2023

Tensor Holography MIT Student creates AI learning advancing Holograms

Posted by in categories: 3D printing, biotech/medical, holograms, media & arts, mobile phones, robotics/AI, virtual reality

From 2021

A new method called tensor holography could enable the creation of holograms for virtual reality, 3D printing, medical imaging, and more — and it can run on a smartphone.

Continue reading “Tensor Holography MIT Student creates AI learning advancing Holograms” »

May 18, 2023

New transparent augmented reality display opens possibilities to see digital content in real-time

Posted by in categories: 3D printing, augmented reality

The world’s first flexible, transparent augmented reality (AR) display screen using 3D printing and low-cost materials has been created by researchers at the University of Melbourne, KDH Design Corporation and the Melbourne Centre for Nanofabrication (MCN). The development of the new display screen is set to advance how AR is used across a wide range of industries and applications.

AR overlays digital content onto the , enhancing the user’s real-time perception and interaction with their environment. Until now, creating flexible AR technology that can adjust to different angles of light sources has been a challenge, as current mainstream AR manufacturing uses glass substrates, which must undergo photomasking, lamination, cutting, or etching microstructure patterns. These time-consuming processes are expensive, have a poor yield rate and are difficult to seamlessly integrate with product appearance designs.

Led by University of Melbourne researchers Associate Professor Ranjith Unnithan, Professor Christina Lim and Professor Thas Nirmalathas, in collaboration with Taiwanese KDH Design Corporation, the team has successfully developed a transparent AR display screen using low-cost, optical-quality polymer and plastic—a first-of-its-kind achievement in the field of AR displays.

May 16, 2023

3D printing of unsupported multi-scale and large-span ceramic via near-infrared assisted direct ink writing Communications

Posted by in categories: 3D printing, materials

In the three-dimensional printing process of ceramic with low-angle structures, additional supporting structures are usually employed to avoid collapse of overhanging parts. However, the extra supporting structures not only affect printing efficiency, but the problems caused by their removal are also a matter of concern. Herein, we present a ceramic printing method, which can realize printing of unsupported multi-scale and large-span ceramics through the combination of direct ink writing and near-infrared induced up-conversion particles-assisted photopolymerization. This printing technology enables in-situ curing of multi-scale filaments with diameters ranging from 410 µm to 3.50 mm, and ceramic structures of torsion spring, three-dimensional bending and cantilever beam were successfully constructed through unsupported printing. This method will bring more innovation to the unsupported 3D manufacturing of complex shape ceramics.


In 3D ceramic printing, the need for additional supports can increase processing time and introduce defects during post-processing removal. Here, authors merge direct ink writing and up-conversion particles-assisted photopolymerization under near-infrared irradiation for support-free printing with controlled curing rates reducing material waste, printing time, and post-processing steps.

May 10, 2023

How to build cheap VR Haptic Gloves to FEEL VR

Posted by in categories: 3D printing, virtual reality

How to build VR Haptic gloves to feel in VR, for really cheap.


Here’s a step-by-step guide on how to build your own budget VR Haptic Gloves! (Prototype 4)

Continue reading “How to build cheap VR Haptic Gloves to FEEL VR” »

Apr 23, 2023

Cormify leverages machine learning and 3D printing to make the best mouse for you

Posted by in categories: 3D printing, robotics/AI

A lightweight, customized mouse delivering maximum comfort and peak performance that fits snugly into your palm and your palm alone.

In this day and age, where we spend hours hunched over a computer, there is a case for everything being ergonomic.

Into this niche steps Formify, a team based out of Toronto with the belief that individualized design should be accessible to everyone.

Apr 21, 2023

China plans to build moon bases using robot masons and lunar dirt

Posted by in categories: 3D printing, robotics/AI, space travel

The plan: Ding could play a key role in helping China get its future lunar bases off the ground — his research team at HUST has designed several potential moon bases and developed technology that could be used to actually construct them on the moon.

One of those is the “Chinese Super Mason,” an autonomous robot designed to create structures out of bricks. Another is the bricks themselves — Ding’s team has come up with a LEGO-like design for the blocks, which it proposes to make using 3D printing, lasers, and lunar regolith.

They could get a chance to see their ideas put to the ultimate test as soon as 2028, as China reportedly plans to send a Super Mason to the moon to build a lunar brick as part of the Chang’e 8 mission, which is expected to launch in 2028.

Apr 14, 2023

Scientists Merge Biology and Technology

Posted by in categories: 3D printing, biotech/medical, neuroscience

Finding ways to integrate electronics into living tissue could be crucial for everything from brain implants to new medical technologies. A new approach has shown that it’s possible to 3D print circuits into living worms.

There has been growing interest in finding ways to more closely integrate technology with the human body, in particular when it comes to interfacing electronics with the nervous system. This will be crucial for future brain-machine interfaces and could also be used to treat a host of neurological conditions.

But for the most part, it’s proven difficult to make these kinds of connections in ways that are non-invasive, long-lasting, and effective. The rigid nature of standard electronics means they don’t mix well with the squishy world of biology, and getting them inside the body in the first place can require risky surgical procedures.

Apr 12, 2023

Self-folding surgical tools fit through a catheter for minimally invasive surgical procedures

Posted by in category: 3D printing

A camel cannot go through the eye of a needle. But researchers at ETH Zurich have now achieved something that—figuratively speaking—comes quite close. They have developed a new approach to minimally invasive surgical instruments, allowing large objects to be brought into the body through a narrow catheter. Their demonstration study has been published in the journal Nature Communications.

This works as follows: The researchers disassemble such devices into individual parts and then slide them through the catheter in a row, like a string of pearls. At the end of the , the parts assemble themselves into a predefined shape thanks to built-in magnets.

Continue reading “Self-folding surgical tools fit through a catheter for minimally invasive surgical procedures” »

Apr 12, 2023

Engineers 3D print soft, rubbery brain implants

Posted by in categories: 3D printing, neuroscience

Technique may enable speedy, on-demand design of softer, safer neural devices.

Apr 3, 2023

3D Printing of Body Parts Gets an Upgrade

Posted by in categories: 3D printing, bioprinting, biotech/medical, robotics/AI

An Australian team of scientists and engineers invent a tiny, flexible, and soft robotic arm to 3D print biomaterial inside a human body.


The F3DB is a proof-of-concept 3D bioprinter that can be inserted into the body to make repairs to damaged tissue.

Page 13 of 141First1011121314151617Last