Menu

Blog

Page 2565

Feb 19, 2022

DIY Float Valve For Passive Hydroponics Leverages 3D Printing

Posted by in categories: 3D printing, habitats

[Billy] has a special interest in passive hydroponics (also known as the Kratky method), which is a way of growing plants in nutrient-rich water that does not circulate. As the plant grows and liquid level drops, only the tips of the roots remain submerged while more and more of the root surface is exposed to oxygen in a harmonious balance. However, “thirsty” plant types (tomatoes, for example) throw off this balance, and the system needs to be modified. To address this, [Billy] designed and printed a passive float valve system that takes care of topping up the reservoir only when needed, without using pumps or any other electrical equipment.

Commercial or industrial float valves are too big to use in his small tanks, which led [Billy] to test dozens of DIY designs. He used everything from plastic water bottles to pipe ends, but nothing quite measured up. With 3D printing, [Billy] was able to create a sealed, lightweight float that exactly matched the housing and tube locations.

Continue reading “DIY Float Valve For Passive Hydroponics Leverages 3D Printing” »

Feb 19, 2022

Bionic eyes: Obsolete tech leaves patients in the dark

Posted by in categories: biotech/medical, cyborgs, transhumanism

The retinal-implant manufacturer has shifted its focus, leaving users with little or no support.

Feb 19, 2022

DIY Hydrophone Listens In On The Deep For Cheap

Posted by in categories: electronics, military

The microphone is a pretty ubiquitous piece of technology that we’re all familiar with, but what if you’re not looking to record audio in the air, and instead want to listen in on what’s happening underwater? That’s a job for a hydrophone! Unfortunately, hydrophones aren’t exactly the kind of thing you’re likely to find at the big-box electronics store. Luckily for us, [Jules Ryckebusch] picked up a few tricks in his 20-year career as a Navy submariner, and has documented his process for building a sensitive hydrophone without needing a military budget.

Continue reading “DIY Hydrophone Listens In On The Deep For Cheap” »

Feb 19, 2022

Housing unaffordability is the result of artificial scarcity

Posted by in categories: economics, habitats

We can summarize this as:

Price = Demand / Supply.

When there is more demand or less supply, the price goes up. When there is less demand or more supply, the price goes down. This is basic economics.

Feb 19, 2022

Using machine learning to understand how brain cells work

Posted by in categories: biotech/medical, genetics, robotics/AI

For something so small, neurons can be quite complex—not only because there are billions of them in a brain, but because their function can be influenced by many factors, like their shape and genetic makeup.

A research team led by Daifeng Wang, a Waisman Center professor of biostatistics and medical informatics and computer sciences at the University of Wisconsin–Madison, is adapting machine learning and artificial intelligence techniques to better understand how a variety of traits together affect the way work and behave.

Called manifold learning, the approach may help researchers better understand and even predict brain disorders by looking at specific neuronal properties. The Wang lab recently published its findings in two studies.

Feb 19, 2022

A Window Into the Future of Wave Energy

Posted by in categories: energy, sustainability

Award Helps Move Cost-Effective, Productive, Robust Wave Energy Design a Step Closer to Commercialization and Widespread Use

In 1974, Stephen Salter, a professor at the University of Edinburgh, sent his “ducks” into the Scottish seas, launching the world’s first major wave energy project. But the ocean’s rough heaves and surges proved too much for his house-sized, floating generators. Like the more recent Pelamis’ P-750 model and Aquamarine’s Oysters, they succumbed to the power they were meant to harness.

Continue reading “A Window Into the Future of Wave Energy” »

Feb 19, 2022

AMD’s ‘fundamental’ 6nm Ryzen upgrade promises ‘massive increase in yield’

Posted by in categories: computing, entertainment

Chip crisis? What chip crisis?


AMD has finally lifted the lid on its Ryzen 6,000 series mobile chips and the core 6nm design is far more than just an optical shrink. The resulting “massive increase in yield” means far more CPUs spilling out of TSMCs foundry, which can only help an industry in a chip supply crisis.

These Zen 3+ CPUs are going to be making their way to gaming laptops soon, and promise great things for notebooks this year. Intel’s Alder Lake mobile CPUs are also going to be dropping at the same time, plus we’ve got Nvidia’s mobile 3,070 Ti and 3,080 Ti to look forward to as well. If you’ve been putting off getting a new mobile gaming machine, then your patience should pay off nicely.

Continue reading “AMD’s ‘fundamental’ 6nm Ryzen upgrade promises ‘massive increase in yield’” »

Feb 19, 2022

Intel confirms 15th Gen Core “Arrow Lake”, Xeon “Granite Rapids” and “Sierra Forest” 2024 series

Posted by in category: futurism

For the first time, Intel confirmed Arrow Lake will succeed Meteor Lake as a client product (Intel Core series). This is a 2024 product that will most likely utilize the same platform as Meteor Lake. The company plans to market Arrow Lake as the 15th Gen Core series, which confirms a year-to-year product release for consumers.

Intel Arrow Lake will utilize three process nodes: Intel 4, Intel 20A, and External N3 technology. For Lunar Lake, which supposedly launches in 2024+ (so 2025?), the company confirmed it will utilize Intel 18A and unnamed external technology.

Feb 19, 2022

The NFT Ecosystem Is a Complete Disaster

Posted by in category: blockchains

Top marketplaces facilitate epic amounts of theft and wash trading, scams are rampant, and the cringe is unbearable. Can it last?

Feb 19, 2022

Low-cost self-healing material for robotic hands and arms

Posted by in categories: robotics/AI, sustainability, wearables

Soft sensing technologies have the potential to revolutionize wearable devices, haptic interfaces, and robotic systems. However, most soft sensing technologies aren’t durable and consume high amounts of energy.

Now, researchers at the University of Cambridge have developed self-healing, biodegradable, 3D-printed materials that could be used in the development of realistic artificial hands and other soft robotics applications. The low-cost jelly-like materials can sense strain, temperature, and humidity. And unlike earlier self-healing robots, they can also partially repair themselves at room temperature.

“Incorporating soft sensors into robotics allows us to get a lot more information from them, like how strain on our muscles allows our brains to get information about the state of our bodies,” said David Hardman from Cambridge’s Department of Engineering the paper’s first author.