Lifeboat Foundation

Wearable human-machine interface devices, HMIs, can be used to control machines, computers, music players, and other systems. A challenge for conventional HMIs is the presence of sweat on human skin.

In Applied Physics Reviews, scientists at UCLA describe their development of a type of HMI that is stretchable, inexpensive, and waterproof. The device is based on a soft magnetoelastic sensor array that converts mechanical pressure from the press of a finger into an electrical signal.

Continue reading “Human-machine interfaces work underwater, generate their own power” »

Thirty seconds of sunlight could boost the battery life of future smartwatches and other wearables by tens of minutes, thanks to a renewable and rechargeable battery prototype developed by the University of Surrey.

Surrey’s Advanced Technology Institute (ATI) has demonstrated how its new photo-rechargeable system, which merges zinc-ion batteries with perovskite solar cells, could allow wearables to spring back to life without the need to plug in.

Jinxin Bi, a Ph.D. candidate at ATI and the first author of the paper, says that “this technology provides a promising strategy for efficient use of clean energy and enables wearable electronics to be operated continuously without plug-in charging. Our prototype could represent a step forward to how we interact with wearables and other internet-of-things devices, such as remote real-time health monitors.”

Most measurements of Newton’s gravity constant use stationary masses, but a new experiment measures the constant with wiggling metal beams.

Researchers at the University of Massachusetts Amherst recently announced that they have figured out how to engineer a biofilm that harvests the energy in evaporation and converts it to electricity. This biofilm, which was announced in Nature Communications, has the potential to revolutionize the world of wearable electronics, powering everything from personal medical sensors to personal electronics.

Researchers have reported the discovery of an exoplanet orbiting Ross 508 near the inner edge of its habitable zone.

Researchers at the University of Massachusetts Amherst recently announced that they have figured out how to engineer a biofilm that harvests the energy in evaporation and converts it to electricity. This biofilm, which was announced in Nature Communications, has the potential to revolutionize the world of wearable electronics, powering everything from personal medical sensors to personal electronics.

“This is a very exciting technology,” says Xiaomeng Liu, graduate student in electrical and computer engineering in UMass Amherst’s College of Engineering and the paper’s lead author. “It is real green energy, and unlike other so-called ‘green-energy’ sources, its production is totally green.”

Continue reading “Researchers engineer biofilm capable of producing long-term, continuous electricity from your sweat” »

Wearable electronics, from health and fitness trackers to virtual reality headsets, are part of our everyday lives. But finding ways to continuously power these devices is a challenge.

University of Washington researchers have developed an innovative solution: the first-of-its kind flexible, wearable thermoelectric device that converts body heat to electricity. This device is soft and stretchable, yet sturdy and efficient—properties that can be challenging to combine.

The team published these findings July 24 in Advanced Energy Materials.

Ultrasound imaging is a safe and noninvasive window into the body’s workings, providing clinicians with live images of a patient’s internal organs. To capture these images, trained technicians manipulate ultrasound wands and probes to direct sound waves into the body. These waves reflect back out to produce high-resolution images of a patient’s heart, lungs, and other deep organs.

Currently, ultrasound imaging requires bulky and specialized equipment available only in hospitals and doctor’s offices. But a new design by MIT engineers might make the technology as wearable and accessible as buying Band-AIDS at the pharmacy.

Continue reading “Engineers develop stickers that can see inside the body” »

Circa 2013

What if your running shoes could really adapt to your feet — and not just in the way that footwear retailers describe to solidify sales. These cutting-edge Protocells Trainers present the fascinating possibilities of wearable living materials that can grow, modify and repair themselves through continuous use.

Shamees Aden has been working with Dr. Martin Hanczyc on these innovative kicks, developing a synthetic biological substance that could be 3D printed to fit the wearer’s feet like gloves. The composite organic fabric would provide surface protection to toes and soles, yet it could also offer support skeletal and muscular. The anatomical tissue of the Protocells Trainers would thicken in areas that experience more pressure, and they could heal their own tears while bottled in a special solution overnight.

Graphene electronic tattoos are unique devices used in healthcare systems for personalized applications. Monolayered graphene electronic tattoos are used to monitor different electrophysiological signals in humans. Despite their innovative functionality, these devices suffer from an impermeability to sweat and difficulties in reproducibility.

Study: Graphene electronic tattoos 2.0 with enhanced performance, breathability and robustness. Image Credit: Tex vector/Shutterstock.com.

In an article recently published in the journal npj 2D Materials and Applications, an enhanced version of graphene electronic tattoos was introduced. This update is wearable on the skin with sweat permeability, superior electrical properties, and robustness. While the older systems suffered scattered electrical properties due to growth or transfer-related discrepancies, the reported graphene electronic tattoos with graphene nanoscrolls (GNS) or multilayered graphene structures showed enhanced properties.

Wearable displacement sensors—which are attached to a human body, detect movements in real time and convert them into electrical signals—are currently being actively studied. However, research on tensile-capable displacement sensors has many limitations, such as low tensile properties and complex manufacturing processes.

If a displacement sensor that can be easily manufactured with high sensitivity and tensile properties is developed, it can be attached to a human body, allowing large movements of joints or fingers to be used in various applications such as AR and VR. A research team led by Sung-Hoon Ahn, mechanical engineering professor at Seoul National University, has developed a piezoelectric strain sensor with high sensitivity and high stretchability based on kirigami design cutting.

In this research, a stretchable piezoelectric displacement sensor was manufactured and its performance was evaluated by applying the kirigami structure to a film-type piezoelectric material. Various sensing characteristics were shown according to the kirigami pattern, and higher sensitivity and tensile properties were shown compared to existing technologies. Wireless haptic gloves using VR technology were produced using the developed sensor, and a piano could be played successfully using them.