Lifeboat Foundation

NASA, in partnership with Space Center Houston, the Official Visitor Center of NASA Johnson Space Center, and NineSigma, a global innovation consultant organization, has opened registration for a new competition — the Space Robotics Challenge. This event seeks to develop the capabilities of humanoid robots to help astronauts on the journey to Mars.

The Space Robotics Challenge is a $1 million prize competition designed to push the boundaries of robotic dexterity. Teams must program a virtual robot, modeled after NASA’s Robonaut 5 (R5) robot, to complete a series of tasks in a simulation that includes periods of latency to represent communications delay from Earth to Mars.

Though some dexterity has been developed for Earth-based robotics systems using hydraulics, such robots cannot be used in space because of the below-freezing temperatures and the harsh environment of planetary surfaces. The R5 uses elastics technology instead of hydraulics – an innovative way of addressing the problems of operating in space. This technology could also benefit humankind on Earth, as they could operate under dangerous or extreme environments on our home planet.

Continue reading “Space Robotics Challenge Prepares Robots for the Journey to Mars” »

Scientists have just found a way to make use of plasma, the fourth state of matter, to improve bone development. Using cold fusion, researchers were able to initiate increased bone growth.

It is a bit ironic that plasma is the least known state of matter, when in fact it is the most abundant in the universe. It is found in our Sun and all other stars, lightning, in our TVs, fluorescent light, and neon signs, and (purportedly) even in our favorite fictional weapon in the Star Wars universe, the lightsaber.

Plasma can be classified according to the degree of ionization, temperature, etc, but whatever form it may take, plasma has been used in various fields, such as in spacecraft propulsion, agriculture, and quite recently, in medicine.

Continue reading “Regenerative Medicine: Plasma Being Used To Improve Bone Healing” »

Next to the medical field, as we follow the significant impacts 3D printing is making on the world, that of aerospace is right at the top of the list. While some are still confused about the actual importance of 3D printing as it hasn’t really affected them personally yet, it’s important to think on a much bigger scale. And there’s not much of a bigger scale than space.

For those who are cynical about the technology, pointing back to the continual supply of keychains and figurines (we all have to start somewhere, thank you!) being pumped out in plastic at the desktop, when you take a look at how long NASA has been involved with additive manufacturing—and how many parts they are using now—well, that’s impressive. Not only that, because of numerous 3D printed parts, larger components are being made that would not have been possible previously, and certainly not with such a level of customization, speed, and affordability.

Continue reading “Aerojet Rocketdyne to Mature 3D Printed MPS-130 CubeSat Propulsion System for NASA” »

At 1.40am this morning, China launched a new Space Race with the world’s first quantum satellite, recently named Micius after an ancient Chinese philosopher and engineer, who, more than 2,400 years ago, proposed that light always travelled in a straight line and that the physical world was made up by particles. Quantum teleportation technology would be able to eliminate the 20-minute time delay in communication between earth and Mars and would allow tiny spacecraft to send back images and videos of planets many light years away without the need to carry a huge antenna. It could even give us a glimpse of what’s inside a black hole.

The one thing still holding us back from interstellar travel is our slow spacecraft and researcher are working on solving this. With our present technology, it will take around five months to reach Mars. But NASA scientist Philip Lubin is working on a system where lasers propel spaceship with massive sails to the Red Planet in only a time period of three days.

Pretty much like Bill Nye’s much-hyped solar sail, this ‘photonic propulsion’ system count on on the momentum of photons to move forward. But as an alternative of photons from the Sun’s rays, Lubin’s system would use a push by huge Earth-based lasers.

Continue reading “NASA researchers are working on a laser propulsion system that could get to Mars in 3 days” »

Last month, NASA announced the winner of its 3D Printed Habitat Challenge, a competition in which entrants were tasked to develop architectural concepts. These concepts were to implement 3D printing techniques for the construction of habitats on Mars, using materials that could be sourced from the Red Planet itself.

The 3D Printed Habitat Challenge received 165 submissions, with the thirty highest scoring entries being displayed at the New York Maker Faire on September 27th. The overall winner and recipient of the $25,000 grand prize was Team Space Exploration Architecture and Clouds Architecture Office with their Mars Ice House design. The runners up were Team Gamma, who received $15,000, whilst third place was awarded to Team LavaHive.

Continue reading “MIT group reveals design for 3D printed fibreglass structures on Mars” »

Go China

Plans for a hypersonic space plane were discussed on broadcaster CCTV It would take off and land on an airstrip, using advanced hybrid enginesState aerospace firm CASTC aims to deliver a working pl…

Continuing on with NASA’s trend of contracting work out to private companies, they have just started accepting bids and designs to create space habitats. The habitat selected will eventually house astronauts in future space missions, and possibly those that go to Mars. In their initial announcement, NASA has shown 6 different companies along with each’s design. This is all part of the NextSTEP-3 program.

Mars Cube One (MarCO) Mission Overview Engineers for NASA’s MarCO technology demonstration check out a full-scale mechanical mock-up of the small craft in development as part of NASA’s next mission to Mars. Mechanical engineer Joel Steinkraus and systems engineer Farah Alibay are on the team at NASA…