Menu

Blog

Archive for the ‘materials’ category: Page 210

Mar 7, 2020

Batman Day: How much has Bruce Wayne spent on being Batman over the years?

Posted by in categories: entertainment, materials

What I used to think was a basic suit for batman is anything but normal if it were true. It would cost about 1 million to make a real life one and the fabrics and materials might as well be alien because they are so exotic but look like fabric. If batman were real it would show how genius of science he truly is as his fabric technology is some of the most creative work any material scientist could ever dream of. Essentially it is like having a tank in a lightweight suit.


Happy Batman Day! DC Comics first created Batman Day for Batman’s 75th anniversary in 2014, and has continued to celebrate the Dark Knight on Sept. 23 each year since. While Harley Quinn has been trying to steal Batman’s thunder (happy 25th, Harls) this year, we still want to take a closer look at the guy who started it all.

A few years ago, MoneySupermarket.com put out an excellent infographic about the cost of being Batman. They used numbers based on The Dark Knight trilogy of films from Christopher Nolan, which means they were using modern technology (and values). But they only looked at base costs, not at ongoing numbers, and the base costs alone were astounding: $682 million just to become Batman. Based on those starting numbers, how much has Bruce Wayne spent on being Batman over the years? We’ll start with their numbers, and break it down based on the DC Comics sliding timeline; thanks to the New 52 reboot, where Bruce had been Batman for “about 7 years,” and assuming at least a year or two has passed since then, let’s go with nine years of Batman-ing.

Continue reading “Batman Day: How much has Bruce Wayne spent on being Batman over the years?” »

Mar 7, 2020

Scientists Finally Observe Long-Predicted Form of Magnetism

Posted by in categories: materials, quantum physics

Scientists believe they’ve made a concrete example of an unusual, theoretical form of ferromagnetism first described by a researcher more than 50 years ago.

Nagaoka ferromagnetism, named for the scientist who discovered it, Yosuke Nagaoka, is a special case of the same magnetic forces that make regular, refrigerator-type magnets work—ferro meaning iron, plus a few other metals that are naturally receptive to magnetism. Identifying it in real life—in this case using a quantum system of electrons—can help scientists understand how spontaneous ferromagnetism works.

Mar 5, 2020

Plastic-eating caterpillars have gut bacteria that can live on polyethylene for over a year

Posted by in categories: food, materials

“The problem of plastic pollution is too large to simply throw worms and there is still a lot to do before we can parlay this work into making a meaningful contribution,” Cassone said. “Also, the larvae tend to eat less plastic with longer times on that type of diet. By understanding the process – why the breakdown of plastic occurs so rapidly in the waxworm—we can then begin to develop ways to really make a meaningful impact to plastic pollution.”

He continued: “Now that we know the microbiome plays a role, if we can better understand how the bacteria works together with the worm and what kind of conditions cause it to flourish, perhaps this information can be used to design better tools to eliminate plastics from our environment.”

Not all are convinced, however. Till Opatz, from the Department of Chemistry at the Johannes Gutenberg University, Germany, was critical of the initial findings that caterpillars digest plastic. At the time he and his colleagues said they disagreed with the methodology and conclusions reported, adding the study “does not provide sufficient proof” that G. mellonella can chemically destroy polyethylene.

Mar 5, 2020

Fungi Can Help Concrete Heal Its Own Cracks

Posted by in categories: health, materials

Circa 2018


One promising candidate is eco-friendly and poses no known risks to human health.

Mar 5, 2020

The caterpillar larvae ‘plastivores’ that consume and metabolize polyethylene

Posted by in categories: biotech/medical, materials

A team of researchers at Brandon University has found that greater wax moth caterpillar larvae are “plastivores” that are able to consume and metabolize polyethylene. In their paper published in Proceedings of the Royal Society B, the group describes their study of the caterpillars and what they learned about them and their gut microbiome.

Prior research has shown that plastics are becoming a major pollutant. In addition to piling up in landfills, they are also broken down into microplastics, which are polluting the world’s oceans. And while there have been some attempts to curb their use, they are still produced and used in abundance in many parts of the world. Thus, scientists have been searching for a way to force such materials to degrade faster—natural degradation takes approximately 100 years. In this new effort, the researchers studied wax moths and their larvae, which are known to invade beehives to eat the honeycombs inside.

The researchers with this new effort had learned of anecdotal evidence that the larvae, which exist as caterpillars, eat low-density polyethylene. To find out if this was true, they obtained multiple caterpillars and fed them a diet of plastic grocery bags. They found that 60 of the caterpillars were able to consume approximately 30 square centimeters of the plastic in a week. They also found that the caterpillars could survive for a week eating nothing but the plastic. The researchers also studied the gut microbiomes of several of the caterpillars and identified bacteria that were involved in digesting plastic. They also allowed some of the bacteria to feast on plastic outside of the caterpillar gut and found that some of them were able to survive for up to a year eating nothing but plastic.

Mar 3, 2020

This concrete is alive

Posted by in category: materials

This concrete can heal itself, saving billions in construction costs.

Mar 2, 2020

The magnet that didn’t exist

Posted by in categories: materials, quantum physics

In 1966, Japanese physicist Yosuke Nagaoka predicted the existence of a rather striking phenomenon: Nagaoka’s ferromagnetism. His rigorous theory explains how materials can become magnetic, with one caveat: the specific conditions he described do not arise naturally in any material. Researchers from QuTech, a collaboration between TU Delft and TNO, have now observed experimental signatures of Nagaoka ferromagnetism using an engineered quantum system. The results were published today in Nature.

Familiar magnets such as the ones on your refrigerator are an everyday example of a phenomenon called . Each electron has a property called ‘spin’, which causes it to behave like a miniscule magnet itself. In a ferromagnet, the spins of many electrons align, combining into one large magnetic field. This seems like a simple concept, but Nagaoka predicted a novel and surprising mechanism by which ferromagnetism could occur—one that had not been observed in any system before.

Mar 2, 2020

Graphene typically costs $200,000 per ton. Now, scientists can make it from trash

Posted by in category: materials

Graphene is insanely useful, but very difficult to produce — until now.

Feb 28, 2020

Researchers Work to Laser-Proof Ships

Posted by in categories: materials, military

Circa 2008


Okay, so no one has quite perfected laser weapons yet, but that doesn’t mean you can’t at least think about possible defenses. Naval researchers are looking at materials that could deflect high-powered lasers, reports Discovery:

Laser_shield “If you have a ship being hit by a laser, and it was made of this metamaterial, you could reflect the laser beam,” said Simin Feng, one of the study co-authors and a researcher at China Lake.

Continue reading “Researchers Work to Laser-Proof Ships” »

Feb 26, 2020

Advancement simplifies laser-based medical imaging

Posted by in categories: biotech/medical, materials

Photoacoustic imaging, a technique for examining living materials through the use of laser light and ultrasonic sound waves, has many potential applications in medicine because of its ability to show everything from organs to blood vessels to tumors.

Caltech’s Lihong Wang, a pioneer in the field, has developed variants of imaging that can show organs moving in real time, develop three-dimensional (3D) images of internal body parts, and even differentiate cancerous cells from healthy cells.

Wang, Bren Professor of Medical Engineering and Electrical Engineering, has now further advanced technology with what he calls Photoacoustic Topography Through an Ergodic Relay (PATER), which aims to simplify the equipment required for imaging of this type.