Menu

Blog

Archive for the ‘food’ category: Page 180

Jul 17, 2020

Metal eating bacteria accidentally discovered by scientists

Posted by in categories: chemistry, food

California (CNN) (07/17/20) — Scientists have discovered a type of bacteria that eats and gets its calories from metal, after suspecting they exist for more than a hundred years but never proving it.

Now microbiologists from the California Institute of Technology (or Caltech) accidentally discovered the bacteria after performing unrelated experiments using a chalk-like type of manganese, a commonly found chemical element.

Dr. Jared Leadbetter, professor of environmental microbiology at Caltech in Pasadena, left a glass jar covered with the substance to soak in tap water in his office sink, and left the vessel for several months when he went to work off campus.

Jul 17, 2020

Printer lickin‘ good: KFC is bioprinting chicken nuggets

Posted by in categories: 3D printing, bioprinting, food

“The partners are working together to develop the world’s first laboratory-produced chicken nuggets. The 3D printed nuggets are expected to be similar in taste and appearance to KFC’s original product, but will have the benefit of being more environmentally friendly to produce.”


When I think of KFC and its largely unchanging menu of fried chicken, I do not immediately think of innovation. However a new collaboration forged between the fast-food company and Russia-based bioprinting firm 3D Bioprinting Solutions might just change my mind. The partners are working together to develop the world’s first laboratory-produced chicken nuggets. The 3D printed nuggets are expected to be similar in taste and appearance to KFC’s original product, but will have the benefit of being more environmentally friendly to produce.

The bioprinted chicken nugget project is already underway, and the unlikely partners plan to have a final product ready for testing by this fall. The effort is part of KFC’s mission to create a “restaurant of the future” which leverages state-of-the-art technologies like 3D bioprinting to overcome solutions in the food industry today: such as finding more eco-friendly alternatives to traditional meat.

Continue reading “Printer lickin‘ good: KFC is bioprinting chicken nuggets” »

Jul 17, 2020

White Castle is testing a burger-grilling robot named Flippy

Posted by in categories: food, robotics/AI

White Castle is introducing a burger-grilling robot — and it might flip the entire restaurant industry.

Jul 16, 2020

Bacteria that eats metal accidentally discovered by scientists

Posted by in categories: chemistry, food

(CNN) — Scientists have discovered a type of bacteria that eats and gets its calories from metal, after suspecting they exist for more than a hundred years but never proving it.

Now microbiologists from the California Institute of Technology (or Caltech) accidentally discovered the bacteria after performing unrelated experiments using a chalk-like type of manganese, a commonly found chemical element.


(CNN)Scientists have discovered a type of bacteria that eats and gets its calories from metal, after suspecting they exist for more than a hundred years but never proving it.

Jul 16, 2020

Neuronal circuits in the brain ‘sense’ our inner state

Posted by in categories: food, neuroscience

Animals have an innate preference for certain scents and tastes. Attractive scents are linked to things like good food. Less attractive scents—that of spoiled food, for example—instinctively give the animal a signal which says: “There could be danger here!” When it comes to taste, all animals have similar preferences: Sugars and fats are perceived positively, whereas a bitter taste is perceived rather negatively.

In order to be able to make such evaluations, we need signals in the that tell us “This is good” or “This is bad.” The in the brain, better known as the reward system, plays an important role in these evaluations.

Jul 14, 2020

New way of studying genomics makes deep learning a breeze

Posted by in categories: biotech/medical, food, robotics/AI

Researchers from the Max Delbrück Center for Molecular Medicine have developed a new tool that makes it easier to maximize the power of deep learning for studying genomics. They describe the new approach, Janggu, in the journal Nature Communications.

Imagine that before you could make dinner, you first had to rebuild the kitchen, specifically designed for each recipe. You’d spend way more time on preparation, than actually cooking. For computational biologists, it’s been a similar time-consuming process for analyzing . Before they can even begin their analysis, they spend a lot of valuable time formatting and preparing huge data sets to feed into deep learning models.

To streamline this process, researchers from MDC developed a universal programming tool that converts a wide variety of genomics data into the required format for analysis by deep learning models. “Before, you ended up wasting a lot of time on the technical aspect, rather than focusing on the biological question you were trying to answer,” says Dr. Wolfgang Kopp, a scientist in the Bioinformatics and Omics Data Science research group at MDC’s Berlin Institute of Medical Systems Biology (BIMSB), and first author of the paper. “With Janggu, we are aiming to relieve some of that technical burden and make it accessible to as many people as possible.”

Jul 14, 2020

Tesla turbine spinning way past 100,000 RPM!

Posted by in categories: food, sustainability

Had some spare time today so this is what I built. A #Tesla #turbine #levitating on #neodymium #magnets

Check out these other videos of the awesome stuff I’ve been working on.

Continue reading “Tesla turbine spinning way past 100,000 RPM!” »

Jul 13, 2020

Spinning chemicals for faster reactions

Posted by in categories: biotech/medical, chemistry, food

Cardiff University scientists have devised a new way of making reactions up to 70 times faster by using state-of-the-art equipment to spin chemicals around.

They found that efficient mixing within a chemical reaction could be achieved by spinning chemicals and catalysts around in a small tube, causing the reactions to happen much quicker.

The new findings could have a profound influence on the way that chemicals are made in a wide variety of industries, from drug development to agriculture and fragrances.

Jul 12, 2020

Self Fuelled Transformable Liquid Metal Machine

Posted by in categories: chemistry, food, robotics/AI

Synthetic self-fuelled motors, which can spontaneously convert chemical energy into mechanical activity to induce autonomous locomotion, are excellent candidates for making self-powered machines, detectors/sensors, and novel robots. The present lab (Zhang et al. in Adv Mater 27:2648–2655, 2004 [1]). discovered an extraordinary self-propulsion mechanism of synthetic motors based on liquid metal objects. Such motors could swim in a circular Petri dish or different structured channels containing aqueous solution with a pretty high velocity on the order of centimeters per second, and surprisingly long lifetime lasting for more than one hour without any assistance of external energy. The soft material liquid metal enables the motors to self-deform, which makes them highly adaptable for accomplishing tough missions in special environment. Interestingly, the motors work just like biomimetic mollusk since they closely resemble the nature by “eating” aluminum as “food”, and can change shape by closely conforming to the geometrical space it voyages in. From practical aspect, one can thus develop a self-powered pump based on the actuation of the liquid metal enabled motor. Further, such pump can also be conceived to work as a cooler. Apart from different geometrical channels, several dominating factors, including the volume of the motor, the amount of aluminum, the property of the solution and the material of the substrate etc., have been disclosed to influence the performance of the autonomous locomotion evidently. This artificial mollusk system suggests an exciting platform for molding the liquid metal science to fundamentally advance the field of self-driven soft machine design, microfluidic systems, and eventually lead to the envisioned dynamically reconfigurable intelligent soft robots in the near future. In this chapter, the typical behaviors and fundamental phenomena of the self fuelled transformable liquid metal machines were illustrated.

Jul 9, 2020

Smart necklace will know you binged on Chunky Monkey

Posted by in category: food

There you are wrist deep into a quart of Ben & Jerry’s Chunky Monkey, digging ever deeper. You can’t deny it. Your necklace is recording the ice-cream binge, which it will later dispatch to a coach or dietician.

The aim is not to induce guilt but rather answer the question: “How did you get here?”

Continue reading “Smart necklace will know you binged on Chunky Monkey” »