Lifeboat Foundation

I told folks just the other day; US Manufacturing in the next 3 to 5 years will primarily be robots, 3-/4-D printers, other AI systems, and a couple of line managers to spot check quality of the operation. Just surprised Amazon wasn’t already fully robotic.

Amazon’s progress toward an army of helpful robots is one step closer: a prize for the best warehouse-working “picker” machine has gone to a robot designed by a team from TU Delft Robotics Institute and Delft Robotics, both based in the Netherlands.

Continue reading “Amazon moves one step closer toward army of warehouse robots” »

This article is a bit odd to me. Why? Because the way 5D printing is describe is not that much more advance than 3D printing. In fact, 4D printing (as shown by Mitsubishi Lads) prints an object that self evolves/ assembles itself into the object specification submitted to the printer. In another article, it was highlighted that 5D printing would take the 4D printing formation and apply technology that enables the object/s to have intelligence to repair/ evolve over time. So, at this point 5D is still being defined.

3D-printed parts made with five-axis technology are stronger and use less material.

Continue reading “3D Printing + Five Axes = 5D Printing?” »

Amazing; imagine when 4D printing produces building materials that self assemble themselves and with 5D printing the building can monitor the building and repairs itself someday in the future.

Hushang Tengda has 3D printed a 400 square meter luxury villa, on site, in just 45 days.

Construction is a huge deal in the 3D printing world right now and the likes of WinSun have made an impact with the first 3D printed office in Dubai. It also printed a five-storey apartment building and 10 3D printed houses in just 24 hours back in China. This villa is a still a breakthrough though, because it was built on site.

Continue reading “Chinese company prints villa on-site” »

Agree. So as a tech engineer, futurist, innovator, leader you have 3 key tracks to remain relevant in the future: bio/ living technology, quantum, and a hybrid of living/ bio meets quantum computing.

Editor €™s Note: Richard van Hooijdonk is a futurist and international keynote speaker on future technologies and disruption and how these technologies change our everyday lives. Van Hooijdonk and his international team research €˜mega trends €™ on digital health, robotic surgery, drones, the internet-of-things, 3D/4D printing, Big Data and other how new technologies affects many industries.

With people living increasingly longer lives, medical care from surgeons, physicians, pharmacists and dentists will increase as well. And since the future of healthcare will look very different from what it is today, the medical field may just be the right industry for you, even if being a doctor or nurse is not your calling. Many new technologies will be incorporated into the healthcare industry and we will see things like robotic surgeries and 3D-printed organ implants, to name a few. This means we will be seeing a whole new host of career opportunities, even for jobs that don €™t actually exist yet.

Continue reading “8 Digital Health Jobs of the Future to Watch” »

The author sounds skeptical about Fujifilm’s 5D printer.

Granted this is suppose to operate itself, etc. However, one of the requirements for 5D printing means that once an object assembles itself (like we see with 4D) that the same object learns, matures, and evolves itself. I too wonder like the author if this does this; we will find out at some point.

Sayonara humans as end-to-end automation set to take people out of print production process.

Continue reading “Fujifilm develops lights out print factory” »

Forget 3D printing, are you ready for 4D printing?

The rapid development of a range of emerging technologies is driving four revolutions in military and security capabilities to which the global defence and security industry is increasingly required to respond.

Perception, processing and cognition

New approaches for both humans and machines to collect, synthesise, digest and discern information are necessary to make sense of complex and fast-moving strategic and operational contexts. Getting (and staying) ahead of threats and maintaining and leveraging situational awareness – especially in environments frequently marked simultaneously by a surfeit of available information of variable quality and timeliness and opacity – is beyond the capacity of legacy technologies and human capabilities.

Continue reading “SECURITY — Promise and peril: opportunities and challenges of disruptive technologies and innovation” »

The Illinois-based Northwestern University has utilized 3D printing technology to research a variety of vital applications, from 3D printing fuel cells to 4D printing materials on the nanoscale. Now, researchers from the prestigious institution are looking at 3D printing technology through a unique lens—a terahertz lens, to be exact. Generally unknown within the electromagnetic spectrum, hidden in between the more commonly known wavelengths of microwaves and infrared, lies the information-packed terahertz spectrum. The terahertz is not only a forgotten frequency, it’s also rarely studied, let alone well understood, yet it has high value in applications regarding imaging and communications.

One research group, led by Northwestern University’s Cheng Sun, has used metamaterials and a unique style of SLA technology called projection micro-stereolithography to manufacture a novel lens capable of working with terahertz frequencies. The 3D printed terahertz gradient-refractive index lens has better imaging capabilities than other commonly used lenses, and also enables researchers to make more advances with the relatively unknown world of the terahertz.

This image shows the self-folding process of smart shape-memory materials with slightly different responses to heat. Using materials that fold at slightly different rates ensures that the components do not interfere with one another during the process. (credit: Qi Laboratory)

Using components made from smart shape-memory materials (which can return to their original shape) with slightly different responses to heat, researchers have demonstrated a “four-dimensional” printing technology that allows for creating complex, self-folding structures.

Read more